• Learn how to size your inverter
• Learn how to size your PV system
• Thin Film Solar module
• Grid Connected Inverter
• series and parallel of solar modules
• Standalone Inverter
• Deep Cycle Battery Vs Cranking Battery
• MPPT VS PWM solar chargers
• PVsyst software for design
• Manual Calculations
• Calculate Tilt Angle
• Define Solar irradiations
• Learn how to size your MPPT charge controller
• Select inverter
• Understand shading and tilt angle
• Understand the Protection devices for PV system

Well, renewable energy, especially Solar Systems is becoming a widely used word on everybody’s tongue, and this is reasonable as the other energy resources began to reduce and furthermore; it’s not clean. So

If you want to start your career in Standalone or Grid-connected solar Design and make money from it? Or if you are interested in solar energy track?

If your answer is a Big Yes. Then this course is the one you need. As it’s the only course which contains all this information in one Place. In this course, we will perform on 5 different softwares (PVsyst, PVsol Premium, Excel, and AutoCAD, SketchUp) in one course.

So, we introduce to you the Ultimate Solar Energy Sketchup, PVsyst, PVsol Premium, Excel, AutoCAD course (the only course that explains everything related to PV system design without prior knowledge) that you need in order to get your hand on Renewable Energy Solar Design. You’ll not have to go to other resources, as this course collects most of the knowledge that you’ll need in your journey.

In this course you will be able to:

1. It’s the only course on any online platform to explain 5 different programs in One Course.

2. Design Complete PV solar systems with the manual calculation.

3. Design Complete PV solar systems using a Complete Excel Sheet.

4. Design Complete PV solar system using 3D SketchUp.

5. Design Complete PV solar systems with the 3D and 2D PVsol Premium {Standalone and Grid-connected}.

6. Design Complete PV solar systems with the PVsyst software {Standalone and Grid-connected}.

7. Design Complete PV solar systems with the AUTOCAD software.

8. 3D Warehouse is explained in SketchUp.

9. Geographical Location is explained in SketchUp, PVsyst, PVsol Premium.

10. The newest Version of Skelion Plugin is Explained.

11. Design 5 different Complete PV solar Projects using 3D SketchUp.

12. Design 4 different Complete PV solar Projects using PVSYST.

13. Design 2 different Complete PV solar Projects using AUTOCAD.

14. Design 3 different Complete PV solar Projects using PVsol Premium.

15. Implementing the financial and economic analysis of any Grid Connected Solar project.

16. Select and differentiate between PV Solar System Panel’ types.

17. Select the best PV Solar System Charger Controllers and understand each type.

18. Select and differentiate between PV Solar System Batteries.

19. Select and differentiate between PV Solar Inverters.

20. Calculate the shading using 3D modeling of PVsol Premium

21. Use PVsol premium software and PVsyst to design grid-tied and standalone systems.

22. Select PV solar system protection devices (Surge protection device, Fuses, and Circuit Breaker).

23. PV solar systems components.

24. Solar panels angles.

25. Solar Charger Sizing and Selection.

26. Financial Analysis using PVsyst.

At this course:

• These tracks would be like a piece of cake to you.

• We’ll take you from the Scratch to a HIGHER level of Designing and Analysis.

• You’ll learn with practical exciting method in order to understand without being bored.

All you need is an open mind and the passion to be successful!

So don’t hesitate and click “ Buy Now ” button so you can begin on the right path!

start your solar energy career now with many practical solar energy accepts in our course
as the solar energy is the trend nowadays

Who this course is for:

• electrical engineering students
• Anyone who wants to get into solar system or PV System
• Electrical and mechanical students
• Solar Designer